Author:
Kushwah Sagarsingh,Bhatt Meet,Desai Chirag,Parekh Shreyashkumar,Joshi Poojan
Abstract
Abstract
The use of adhesive bonding is increased in load-bearing applications in place of conventional joining techniques such as bolted or rivets joints. The high-stress concentration occurs at the end of an adhesive-bonded lap joint so all failures begin at the end of the overlap region and get fractured in the end. The single-lap adhesive-bonded joint was used in the current study to examine the peel stress and shear stress results along the overlap region. The comparison of the analytical and experimental result was made to validate the results along with it the load vs displacement curve was obtained from results. Also, stress vs strain curve and peel stress vs overlap length of the one mm thickness of testing specimen was obtained.
Reference16 articles.
1. Optimization of coil spring by finite element analysis method of automobile suspension system using different materials;Kushwah;Materials Today: Proceedings,2021
2. Evaluation of Strength of Adhesively Bonded Metallic Single Lap Joint with Different End Geometries;Ahmed;SAE Technical Paper,2018
3. Lumped parameter models for adhesive contact mechanics;Jayadeep;Int. J. Adv. Eng. Sci. Appl. Math.,2020
4. On Experimental and finite element studies of bolted, bonded and hybrid step lap joints of thick carbon fiber/epoxy panels used in aircraft structures;Chowdhury;Composites Part B,2016
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献