Author:
Samuel A U,Araoyinbo A O,Elewa R R,Biodun M B
Abstract
Abstract
Aluminium alloy is one of the most widely used engineering materials due to their relatively lower specific weight and corrosion resistance compared to steel. Besides, they are also relatively easier to machine. Aluminium alloys have been found to provide the highest degree of machinability compared to other lightweight metal such as titanium and magnesium alloys. Among every other type of aluminium alloy, the 6061 aluminium alloy has been used for general purposes due to some interesting attributes it possesses when compared to others. The investigation on the effect of machining condition on the corrosion of 6061 aluminium alloy has shown that the machining via electrical discharged provides better resistance to pitting corrosion than the diamond and carbide turning machine. Drilling, turning and cutting may influence the mechanical characteristics of the workpiece by producing hole opening around the low residual stresses and a small layer of extremely stressed material on the newly created surface, making it to become more prone to fatigue, crack propagation and corrosion at the stressed surface. The machining surface integrity has great influences on the fatigue lifetime of material since micro-cracks always initiate at the surface. The traditional machining techniques compared to the non-traditional or non-conventional techniques are more susceptible to the induction of poor surface integrity due to direct contact between the tool and workpiece which are characterised by several damage defects such as micro-cracks, surface hardening, roughness and residual tensile. This paper therefore provides an overview of the classes of aluminium alloys, there applications and machining of the alloys with a keen focus on 6061 aluminium alloy and exposition of various machining technique with both their beneficial and non-beneficial effects on the workpiece, tool life and the environment.
Reference58 articles.
1. Wrought Al-Cast Al compound casting based on zincate treatment for aluminum wrought alloy inserts;Schwankl;Journal of Materials Processing Technology,2016
2. Comparison of mechanical properties of AlSiMg alloy with varied composition;Madhav;International Journal of Engineering and Technology Research,2016
3. Analysis of crystallization kinetics of cast aluminum-silicon alloy;Tanski;Journal of thermal analysis and calorimetry,2016
4. Effect of CCBP doping on the multifunctional Al-0.5 Mg-15CCBP superalloy using liquid metallurgy process for advanced application;Fayomi;Journal of Alloys and Compounds,2019
5. Aluminum alloys for lightweight automotive structures;Benedyk;Materials, Design and Manufacturing for Lightweight Vehicles,2010
Cited by
23 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献