Abstract
Abstract
This paper studies a control strategy to drive a brachiation robot to realize the movement from an arbitrary initial posture to the desired target position imitating a gibbon to move from branch to branch. The main control aim is to drive an underactuated 2-DOF brachiation robot to reach the target in two action modes of swing motion and locomotion motion. Then, a brachiation motion controller is designed to consist of two control processes in which one is used to drive the brachiation robot to move from the suspend posture to the target position via a Lyapunov method, and the other is to ensure that the end of the link of the robot can reach the target bar through direction feedback control. Finally, some experimental results show that the control method can succeed to control a brachiation robot to achieve successfully the movement from one bar to another adjacent bar in two different cases.
Reference21 articles.
1. The swing up control problem for the Acrobot;Spong;IEEE Control Systems.,1995
2. Swing-up and balancing control of acrobat;Kobayashi,2003
3. Stabilization of underactuated planar acrobot based on motion-state constraints;Lai;International Journal of Non-Linear Mechanics.,2015
4. Dynamic model and motion control analysis of three-link gymnastic robot on horizontal bar;Xie,2003
5. Swing-Up Control for a 3-DOF Gymnastic Robot With Passive First Joint: Design and Analysis;Xin;IEEE Transactions on Robotics,2007
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. Trajectory Tracking Control of Differential Driving Double-Wheeled Mobile Robot;2022 IEEE 2nd International Conference on Electronic Technology, Communication and Information (ICETCI);2022-05-27
2. A Nonlinear Optimal Control Approach for Multi-DOF Brachiation Robots;International Journal of Humanoid Robotics;2021-10