Author:
Zhang Jie,Zhang Junchao,Xu Bingshe,Fu Qiang,Wang Chen,Zhao Haodi
Abstract
Abstract
High junction temperature (Tj) of LED will affect the performance and life of LED, so this paper proposes a high-power LED junction temperature test method. Mainly aiming at the problem that the accuracy of the forward current method (FCM) will be affected by the calibration procedure, equipment aging, and technical differences when batch testing LED Tj, this paper uses the relationship between relative current and Tj to calibrate the procedure based on this method, to limit the negative affection of sample heterogeneity. Ten LED samples were tested in the experiment, and the Tj errors under two test methods were obtained. The results showed that the improved method was more accurate than the traditional method. Then, the Tj error of the improved method was compared with that of the forward voltage method, and the error of the new method was smaller.
Subject
General Physics and Astronomy
Reference12 articles.
1. Thermal performance of plate fin heat sinks with dual-height fins subject to natural convection [J];Jeon;International Journal of Heat and Mass Transfer,2017
2. Advanced thermal enhancement and management of LED packages [J];Weng;International Communications in Heat and Mass Transfer,2009
3. Effect of phosphor layer’s location on LED’s luminous depreciation under elevated temperature [J];Chen;Chinese Science Bulletin,2017
4. Junction temperature and thermal resistance restrict the development of high-power LED [J];Binhai;Chinese Journal of Luminescence,2005