Author:
Nugroho Andi,Setiadi Rahmondia Nanda,Umar Lazuardi
Abstract
Abstract
Temperature measurement with a control system aims to improve the quality of automation processes in the field of instrumentation, automatic systems and especially food production. The primary function of the control system is to maintain predetermined or changeable variables under specified conditions. The control system is determined by three factors, namely, process variables, controller variables and manipulated variables. In this study, the temperature response was measured in an acrylic box with a size of 30×30×20 cm3 using a PT100 sensor. The temperature response was verified with a PID control system integrated with LabVIEW software and acquired by a PCI 6221 card. The PT100 sensor calibration with the Voltcraft digital temperature shown a linear relationship. The results of the temperature response test with the PI system produced P and I parameters of 9.03 and 2.7 min, respectively, while in the PID system the P, I and D parameters were 13.2, 6.2 min and 0.2 min, respectively. The response of the control system with the PI type is more stable and consistent than the PID type. Based on the results obtained, the temperature control process using a PI or PID control system with a TD value of 0 is more recommended.
Subject
General Physics and Astronomy
Reference16 articles.
1. A humidity control system based on T & H-decoupling and PID self-tuning fuzzy algorithm;Jingjie,2007
2. Low-temperature desiccant-based food drying system with airflow and temperature control;Nagaya;J. Food Eng,2006
3. Monitoring the Environmental Temperature of the Arduino Assistance Engineering Faculty Using Telegram;Hariyanto;J. Robot. Control,2020
4. Temperature Control using PLC and LabVIEW Integration Int;Nerkar,2018
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Smart Food Box Design with IoT Based Android Monitoring System;2023 Eighth International Conference on Informatics and Computing (ICIC);2023-12-08