Atomic layer deposition of AlN on different SiC surfaces

Abstract

Abstract Thin AlN films were grown using a Picosun R-200 atomic layer deposition (ALD) reactor on SiC surfaces with different crystallographic orientation: on-axis 4H-SiC (0001) and 8° off-axis 4H-SiC. TMA (trimethylaluminium) and NH3 were used as precursors while hydrogen and nitrogen plasma were applied for in-situ substrate cleaning. The substrate temperatures were 400 °C and 450 °C, with 20 ALD cycles. The surface morphology was investigated by scanning electron microscopy (SEM), which revealed nanometer-sized islands in all films. The AlN films deposited on on-axis 4H-SiC at 450 °C substrate temperature exhibited a relatively small roughness of about 0.255 nm. The chemical composition and bonding states were investigated by X-ray photoelectron spectroscopy. For all layers, high-resolution XPS showed Al 2p and N 1s spectra that are characteristic of AlN. These results are a good prerequisite of establishing the growth conditions of AlN films for surface acoustic wave (SAW) devices.