Author:
Jonak J,Karpiński R,Wójcik A
Abstract
Abstract
The paper presents the results of a numerical analysis using the Finite Element Method (FEM) of the friction issue in the contact between the undercut anchor head and rock during anchor pull-out. Formation of failure zone of rock medium was analysed assuming different Coulomb friction coefficients in the contact zone of conical anchor head with a rock. The problem is interesting as regards practical aspects of rock mass loosening during anchor pull-out. The analysis revealed a significant effect of the friction coefficient on the propagation and extent of the failure zone. Increasing the friction factor significantly decreases the extent of the failure zone measured on a free rock surface.
Subject
General Physics and Astronomy
Reference36 articles.
1. Fem and experimental analysis of thin-walled composite elements under compression;Różyło;Int. J. Appl. Mech. Eng.,2017
2. The post-critical behaviour of compressed plate with nonstandard play orientation;Falkowicz;Compos. Struct.s,2020
3. Quantitative estimation of the tool wear effects in a ripping head by recurrence plots;Litak;J. Theor. Appl. Mech..,2008
4. The Effect of Geometrical Non-Linearity on the Crashworthiness of Thin-Walled Conical Energy-Absorbers;Rogala;Materials,2020
5. The influence of load eccentricity on the behavior of thin-walled compressed composite structures;Wysmulski;Compos. Struct.,2019
Cited by
14 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献