Author:
Weislein Tobias,Seel Ferdinand,Lutz Thorsten,Krämer Ewald
Abstract
Abstract
It is well known that the vortex system in a horizontal axis wind turbine wake is highly relevant in terms of fatigue loads and performance of wind turbines located in the wake of other wind turbines. The breakdown process of tip vortices particularly influences the mixing process of the low-speed wake region with the undisturbed flow outside the wake. As a collaboration with the Technische Universität Berlin (TUB), a major goal in a joint research is to study the effects involved in tip vortex breakdown. TUB designed a model turbine that will be towed through a large water tank to analyse and to control the tip vortex decay. To accommodate the measurement equipment, the ratio of blade length to nacelle length is unconventionally small, leading to uncertainty regarding the effect on the breakdown of the tip vortex. Due to the dimensions of the model wind turbine the root vortex system and the nacelle wake are not comparable to former studies and should therefore be investigated in detail. To do so computational fluid dynamics, in particular delayed detached eddy simulations, are conducted for the model turbine with the compressible flow solver FLOWer and the two-equation Menter-SST turbulence model. Two simulations are conducted with and without the nacelle. The results indicate that the root vortices propagate downstream and interact with each other. Additionally, these vortical structures are also influenced by the geometry of the turbine nacelle which causes faster decay of the root vortices compared to a configuration without the nacelle. However, the root vortex breakdown does not influence the tip vortices as the turbulent intensity matches for the area where tip vortices are present. In short, this investigation shows that the influence of the nacelle geometry and root vortex system on the tip vortices is negligible. Thus, the model wind turbine designed by TUB is suitable for the investigation of tip vortices.