Experimental study on surface characteristics in μED milling of Al6063%-5%B4C-5%ZrSiO4 composite using TOPSIS method

Abstract

Abstract Al6063 composites are widely used in automobile, aerospace and biomedical industries due to their excellent mechanical properties. Machining of micro channels in composites is difficult for conventional machining process due to presence of hard reinforcement. Materials with base metal. Micro Electrical discharge (μED) milling is popular micromachining technique for machining simple, intricate shapes and microchannels on any conductive material. However, it a slow machining process, the identification of optimum condition has become wide research area in μEDM. The present work aims to study the influence of process variables namely voltage, spindle speed and threshold on machining characteristics of μED milling of Hybrid Metal Matrix Composites (HMMCs). Experimental trials are carried out with copper electrode at different parametric condition. Al6063%-5%B4C-5%ZrSiO4 composite was fabricated using stir casting method and experimental runs were designed using general full factorial method. The significant parameters are identified using Analysis of Variance (ANOVA) and the ideal machining conditions for multi-response are determined using Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method. The morphology of machined surface with best and worst conditions is examined using SEM. Results indicated that the voltage and threshold are the influencing parameters for considered response indicators. Recast layer thickness seems to be low with best machining conditions as compared to worst conditions. Increase in voltage and threshold increases the Material Removal Rate (MRR) and decreases the Electrode Wear Rate (EWR). Surface finish is better when the lower order of capacitance and voltage is used. MRR is increased by 48% with best machining conditions compared to worst machining condition.