Effect of pressure on the electrical properties of flexible NiPc thin films fabricated by rubbing-in technology

Abstract

Nickel phthalocyanine (NiPc) film was deposited onto the surface of flexible conductive glass by rubbing-in technology and used to fabricate devices based on ITO/NiPc/CNT/rubber structure. The I–V characteristics of the devices were investigated under different uniaxial pressures of 200, 280, and 480 gf/cm2, applied perpendicular to the surface of the NiPc film. Results showed that the nonlinearity coefficients of the I–V curves are in the range of 2 to 3, which was found to be decreased with the increase of the pressure. The rectification ratio of the devices was estimated to be varied from 1.5 to 3 based on the applied pressure. Concluding, the resistance of the active layers was decreased with the increase of both pressure and voltage. We believe that using the rubbing-in technology under sufficient applied pressure it is possible to utilize NiPc for the development of various electronic devices such as diodes, nonlinear resistors, and sensors.