Discharge and jet characteristics of gliding arc plasma igniter driven by pressure difference

Abstract

Abstract Stable combustion in an afterburner can help increase the thrust of the engine in a short time, thereby improving the maneuverability of a fighter. To improve the ignition performance of an afterburner, a twin-duct ignition platform was designed to study the performance of a gliding arc plasma igniter in close-to-real afterburner conditions. The research was carried out by a combination of experiments and simulations. The working environment of the igniter was explored through a numerical simulation. The results showed that the airflow ejected from the radiating holes formed a swirling sheath, which increased the anti-interference ability of the airflow jet. The influence of the pressure difference between the inlet and outlet of the igniter (Δp), the flow rate outside the igniter outlet (W 2), and the installation angle (α) on the single-cycle discharge energy (E) as well as the maximum arc length (L) were studied through experiments. Three stages were identified: the airflow breakdown stage, the arc evolution stage, and the arc fracture stage. E and L increased by 107.3% and 366.2%, respectively, with Δp increasing from 10 to 70 Torr. The relationship between L and Δp obtained by data fitting is L = 3 − 2.47/(1 + (Δp/25)4). The relationship of L at different α is L α=0° > (L α=45° and L α=135°) > L α=180° > L α=90°. E and L decrease by 18.2% and 37.3%, respectively, when Δp = 45 Torr and W 2 is increased from 0 to 250 l min−1.