Suction measurement in freezing soils using pore pressure transducers

Abstract

Abstract Frost heave is major problem for infrastructures build in cold regions. Frost heave occurs due to suction (negative pore water pressure) generated due to the freezing process close to the frost line, i.e., at the frozen fringe. To understand and predict these negative pore water pressures is a key factor to accurately calculate the segregation heave, i.e. heave related to the formation of ice lenses. Segregation heave is the major part of the total heave and also the most challenging to predict. Many attempts have been presented in literature where the generated suction during freezing is related to temperatures, temperature gradients, grain size of the freezing soil etc. Very few laboratory tests have been presented in which the actual suction is measured during the ice lens formation process and compared with theoretical estimations. One reason is that these measurements are challenging. This paper presents results from laboratory measurements of generated suction during freezing. Laboratory tests were conducted on a silty soil sample and suction was measured at the frozen fringe using small pore pressure transducers (PPT’s). The samples were subjected to one-dimensional freezing from top to bottom in an open water system at a constant temperature gradient. Temperatures were measured at various points along the height of the soil sample while suction was measured at middle of the sample. Test results have shown that PPTs do not show pressure change in long-term static pressure test under sub-freezing temperature. For suction measurement at the frozen fringe, pore pressure readings should be measured at various points along the sample height.