Simulation Analysis on the Blade Airfoil of Small Wind Turbine

Abstract

Abstract The selection of the blade airfoil of wind turbine has a crucial impact on the overall efficiency of wind turbine and wind energy utilization. Aiming at the small 300W household wind turbine on the market, based on its known design parameters and using the software of Profili and SolidWorks, the 3D solid modeling of the blade has been achieved in three common airfoils (NACA4412, NACA0009 and NACA 23012). Then, by using the Fluent module of the finite element analysis software ANSYS, the actual working environment of the blade is simulated. The results show that the blades under the NACA0009 airfoil can produce a relatively maximum axial torque of 3.7808 Nm. Finally, based on the above research method, the new airfoil Icarus was discovered by improving the existing airfoil, which has a relatively low manufacturing cost, and the average pressure difference per unit area of the blade is 4.95% higher than that of the NACA0009 airfoil. This research can provide reference for the improvement of airfoil of small wind turbines, which has certain practical significance and practical value.