High-precision robotic kinematic parameter identification and positioning error compensation method for industrial robot

Abstract

Abstract A method based on laser tracing multi-station measurement technology is proposed in this paper. The method identifies the robotic kinematic parameters and compensates for the absolute positioning errors of industrial robots to improve the absolute positioning accuracy further. The position coordinates of industrial robots are typically measured using laser tracking devices. In this study, the measurement accuracy of an industrial robot is further enhanced using laser tracer multi-station measurement technology. Additionally, the least absolute shrinkage and selection operator (LASSO) algorithm was used to identify the robotic kinematic parameters. Compared with the commonly used least squares algorithm, the LASSO algorithm improved the parameter identification accuracy and the compensation effect on absolute positioning errors. A position error model was established based on the parameters of the modified Denavit–Hartenberg model of an industrial robot. Using the LASSO algorithm, the robotic kinematic parameters were accurately identified, and the original data in the controller were replaced to compensate for the geometric errors of the industrial robot. In the compensation experiments, after implementing the geometric error compensation, the average absolute positioning error of the industrial robot decreased by 41.15%, demonstrating a significant improvement in the absolute positioning accuracy.