Abstract
Abstract
Friction Stir Welding (FSW) was carried out to examine the influence of filler materials and varying process parameters on the microhardness and the joints corrosion resistance properties. Aluminium alloys 6082 and 5052, having 8 mm thickness was joined by varying parameters. The primary process parameters are rotational speed, tool travel speed, plunge depth, filler holes centre distance and filler ratio. The hardness at the weld nugget zone and corrosion rate evaluations were analyzed. The best results were obtained for the parameter combinations of 1150 rpm tool rotation, 130 mm min−1 tool travel, 0.2 mm tool plunge, the filler holes centre distance 2 mm and a powder filler made of 95% magnesium and 5% chromium.
Funder
TEQIP-II
Shandong University
Government College of Technology
Institute of Materials
Subject
Metals and Alloys,Polymers and Plastics,Surfaces, Coatings and Films,Biomaterials,Electronic, Optical and Magnetic Materials
Cited by
26 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献