Improving the low-cycle fatigue properties of laser-welded Al–Zn–Mg–Cu alloy joints using double-sided ultrasonic impact treatment

Abstract

Abstract To improve the low-cycle fatigue properties of Al–Zn–Mg–Cu 7075 aluminum alloy laser-welded joints, a post-weld treatment method for double-sided ultrasonic impact treatment (DSUIT) was used to treat the joints. The mechanism of different DSUITs on the microstructure and fatigue properties of welded joints was analyzed. The results showed that DSUIT reduced the welding defects and roughness of the joint surface, and the dendrite structure at the upper and lower surfaces of the joints was broken to form a plastic deformation layer (PDL) with an approximate thickness of 100 μm. Furthermore, the texture strength and grain size at the PDL were reduced. A beneficial residual compressive stress was introduced into the upper and lower surfaces of the joints after the DSUIT. When the number of cycles was 2 × 106, the maximum fatigue strength of the joints was 103.02 MPa after DSUIT, indicating an increase of 111.8% of the untreated joints of 48.62 MPa. Moreover, observance of the fatigue fracture of the joints revealed that the PDL produced by the DSUIT inhibited the initiation and propagation of cracks at the surface. Therefore, the DSUIT effectively improved the low-cycle fatigue properties of the joints.