Development of a climbing robot for inspection of long weld lines

Abstract

PurposeThe project Climbing Robot Cell for Fast and Flexible Manufacture of Large Scale Structures seeks to modernise and take into the future the technology of the manufacture of large fixed welded structures. It creates a transportable manufacturing cell consisting of a team of cooperating climbing robot work tools whose activities are coordinated and integrated through a central intelligence. The purpose of this paper is to present a wheeled robot, called NDT robot, designed for the real time inspection of long weld lines simultaneously with the welding process.Design/methodology/approachNeodymium permanent magnets are used for adhesion, which are capable of producing a maximum adhesion pressure of 4 × 104 Nm−2 at a 20 mm air gap. The strong neodymium magnets give the robot a high payload carrying capability. The arrangement of the magnet array increases its performance at large air gaps so that the robot has excellent capability to overcome obstacles, such as weld caps. The design of the wheeled robot with two sections jointed by a hinge joint has the advantage of high speed and good manoeuvrability, as well as working on curved surfaces and transferring between angled adjoining surfaces.FindingsThe NDT robot has been developed with the capability of climbing on steel walls carrying the specified payload and the ability to overcome the obstacles. The robot is also able to climb on curved surfaces with excellent manoeuvrability, and transfer between angled adjoining surfaces.Originality/valueThe arrangement of the magnet array enables the robot to retain a strong holding force at big air gap, so that the ability of the robot to overcome obstacles and work on curvatures is strengthened. The two‐section design improves the robot's performance on curvatures and enables it to transfer between angled adjoining surfaces.