Manual guidance for industrial robot programming
Author:
Massa Daniele,Callegari Massimo,Cristalli Cristina
Abstract
Purpose
– This paper aims to deal with the problem of programming robots in industrial contexts, where the need of easy programming is increasing, while robustness and safety remain fundamental aspects.
Design/methodology/approach
– A novel approach of robot programming can be identified with the manual guidance that permits to the operator to freely move the robot through its task; the task can then be taught using Programming by Demonstration methods or simple reproduction.
Findings
– In this work, the different ways to achieve manual guidance are discussed and an implementation using a force/torque sensor is provided. Experimental results and a use case are also presented.
Practical implications
– The use case shows how this methodology can be used with an industrial robot. An implementation in industrial contexts should be adjusted accordingly to ISO safety standards as described in the paper.
Originality/value
– This paper presents a complete state-of-the-art of the problem and shows a real practical use case where the approach presented could be used to speed up the teaching process.
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Control and Systems Engineering
Reference31 articles.
1. Abu-Dakka, F.J.
,
Nemec, B.
,
Kramberger, A.
,
Glent Buch, A.
,
Krüger, N.
and
Ude, A.
(2014), “Solving peg-in-hole tasks by human demonstration and exception strategies”,
Industrial Robot: An International Journal
, Vol. 41 No. 6, pp. 575-584. 2. Bascetta, L.
,
Ferretti, G.
,
Magnani, G.
and
Rocco, P.
(2013), “Walk-through programming for robotic manipulators based on admittance control”,
Robotica
, Vol. 31 No. 7, pp. 1143-1153. 3. Bischoff, R.
,
Kurth, J.
,
Schreiber, G.
,
Koeppe, R.
,
Albu-Schaeffer, A.
,
Beyer, A.
,
Eiberger, O.
,
Haddadin, S.
,
Stemmer, A.
,
Grunwald, G.
and
Hirzinger, G.
(2010), “The KUKA-DLR lightweight robot arm - a new reference platform for robotics research and manufacturing”, Robotics (ISR), 2010 41st International Symposium on and 2010 6th German Conference on Robotics (ROBOTIK), Munich, pp. 1-8. 4. Calinon, S.
,
D’Halluin, F.
,
Sauser, E.
,
Caldwell, D.
and
Billard, A.
(2010), “Learning and reproduction of gestures by imitation: an approach based on Hidden Markov Model and Gaussian Mixture Regression”,
IEEE Robotics and Automation Magazine
, Vol. 17 No. 2, pp. 44-54. 5. Chen, Z.
and
Kazanzides, P.
(2013), “Force control of a non-backdrivable robot without a force sensor”, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Tokyo, pp. 3570-3575.
Cited by
49 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|