ARES, a variable stiffness actuator with embedded force sensor for the ATLAS exoskeleton
Author:
Cestari M.,Sanz-Merodio D.,Arevalo J.C.,Garcia E.
Abstract
Purpose
– The purpose of this study is to present a variable stiffness actuator, one of whose main features is that the compliant elements simultaneously allow measuring of the torque exerted by the joint. Conceived as a force-controlled actuator, this actuator with Adjustable Rigidity and Embedded Sensor (ARES) is intended to be implemented in the knee of the ATLAS exoskeleton for children to allow the exploitation of the intrinsic dynamic during the locomotion cycle.
Design/methodology/approach
– A set of simulations were performed to evaluate the behavior of the actuator mechanism and a prototype of the variable impedance actuator was incorporated into the exoskeleton’s knee and evaluations of the torque measurements capabilities along with the rigidity adjustments were made.
Findings
– Mass and inertia of the actuator are minimized by the compact design and the utilization of the different component for more than one utility. By a proper match of the compliance of the joint and the performed task, good torque measurements can be achieved and no bandwidth saturation is expected.
Originality/value
– In the actuator, the compliant elements simultaneously allow measuring of the torque exerted by the join. By a proper match of the compliance of the joint and the performed task, good torque measurements can be achieved and no bandwidth saturation is expected.
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Control and Systems Engineering
Reference29 articles.
1. Albu-Schaffer, A.
,
Eiberger, O.
,
Grebenstein, M.
,
Haddadin, S.
,
Ott, C.
,
Wimbock, T.
,
Wolf, S.
and
Hirzinger, G.
(2008), “Soft robotics”,
Robotics Automation Magazine, IEEE
, Vol. 15 No. 3, pp. 20-30. 2. ARGO Medical Technology
(2014), available at: www.rewalk.com// 3. Cestari, M.
,
Sanz-Merodio, D.
,
Arevalo, J.
and
Garcia, E.
(2012), “Development of synergic multiarticular actuation in a lower-limb active orthosis”, 13th Mechatronics Forum International Conference, Linz, Austria. 4. Cherelle, P.
,
Grosu, V.
,
Beyl, P.
,
Mathys, A.
,
Van Ham, R.
,
Van Damme, M.
,
Vanderborght, B.
and
Lefeber, D.
(2010), “The maccepa actuation system as torque actuator in the gait rehabilitation robot altacro”, 3rd IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), Tokyo, Japan, pp. 27-32. 5. Eiberger, O.
,
Haddadin, S.
,
Weis, M.
,
Albu-Scha?ffer, A.
and
Hirzinger, G.
(2010), “On joint design with intrinsic variable compliance: derivation of the dlr qa-joint”, IEEE International Conference on Robotics and Automation (ICRA), Anchorage, Alaska, pp. 1687-1694.
Cited by
28 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|