Properties of glass/epoxy sandwich structure for electronic boards

Abstract

Purpose This study aims to characterize a novel glass/epoxy architecture sandwich structure for electronic boards. Understanding the thermo-mechanical behavior of these composites is important because it is possible to pre-determine whether defined “internal” thick laminates will be suitable for embedding components in the direction of the axis “z,” i.e. this method of manufacturing multilayer laminates can be used for incoming miniaturization in electronics. Design/methodology/approach Laminates with a low glass transition temperature (Tg) and high Tg with E-glass type were treated, tested and compared. Testing samples were manufactured by nonstandard two steps unidirectional lamination as a multilayer structure based on prepreg layers and as “a sandwich structure” to explore its effect on thermo-mechanical properties. The proposed tested method determines the time and temperature-dependent viscoelastic properties of the board by using dynamic mechanical analysis, thermo-mechanical analysis and three-point bend tests. Findings This testing method was chosen because the main property that promotes sandwich structure is their high stiffness. Glass/epoxy stiff and thermal stabile sandwich structure prepared by nonstandard two-stage lamination is proper for embedding components and the next miniaturization in electronics. Originality/value Compared with by-default applied glass-reinforced homogenous laminates, novel architecture sandwich structure is attractive because of a combination of strength, stiffness and all while maintaining the miniaturization requirement and multifunctional application in electronics.