Abstract
PurposeTo investigate the film cooling effectiveness in a flat plate with a single row of rectangular injection holes.Design/methodology/approachThree injection holes in model are in a single row. The holes are rectangular cross section and they are 9 × 6.5 mm. The injection holes are inclined at 30° along the mainstream direction. The blowing ratios are from 0.5 to 2.0. The experiments and their computational models are established to investigate its effects at the 330 and 335 and 340 K injection temperatures and the different blowing ratios.FindingsResults show that the blowing ratio and injection temperature and momentum flux ratio affect the film cooling effectiveness and to provide a good film cooling performance in both mainstream and lateral direction a suitable blowing ratio should be selected. In this study, the highest effectiveness is determined at a blowing ratio of 0.5. Further increasing this ratio results in reverse effect on the film cooling effectiveness.Originality/valueIt is the fist time the film cooling effectiveness is compared at the rectangular injection holes as experimental and numerical.
Reference27 articles.
1. Baldauf, S., Schulz, A. and Wittig, S. (2001), “High‐resolution measurements of local effectiveness from discrete hole film cooling”, Journal of Turbomachinery, Vol. 123, pp. 758‐65.
2. Bergeles, G., Gosman, A.D. and Launder, B.E. (1976), “The prediction of three dimensional discrete‐hole processes. Part 1: laminar flow”, Journal of Heat Transfer, Vol. 98, pp. 379‐86.
3. Bergeles, G., Gosman, A.D. and Launder, B.E. (1980), “Double‐row discrete‐hole cooling: an experimental and numerical study”, Journal of Engineering for Power, Vol. 102.
4. Bergeles, G., Gosman, A.D. and Launder, B.E. (1981), “The prediction of three dimensional discrete‐hole processes. Part 2: turbulent flow”, Journal of Heat Transfer, Vol. 103.
5. Brauckmann, D., Lipowsky, H. and von Wolfersdorf, J. (2005), “Film cooling experiments using steady state and transient infrared thermography”, paper presented at 6th Conference on Turbomachinery Fluid Dynamics and Thermodynamics, LILLE, 76_03/117, March 7‐11.
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献