Technology and application of the LTCC-based microfluidic module for urea determination

Abstract

Purpose – The purpose of this paper is to focus on the technology and performance of the miniature microfluidic module for urea determination. The presented module was made using low-temperature co-fired ceramics (LTCC). It shows the possibility for the integration of the bioreceptor layers with structures that have been fabricated using modern microelectronic technology. Design/methodology/approach – The presented microfluidic module was fabricated using LTCC technology. The possibility for the fabrication of an enzymatic microreactor in a multilayer ceramic substrate, made of CeramTec glass ceramic (GC) material systems with an integrated thick-film heater, is studied. Different configurations of the LTCC/heater materials (gold, silvers and palladium-silver) are taken into account. The performance of the LTCC-based microfluidic module with the integrated heater and immobilized enzyme was examined experimentally. Findings – A compatible material for the heater embedded in the CeramTec GC-based structures was found. The preliminary measurements made for the test solution containing various concentrations of urea have shown stability (for seven days of operation) and a relatively high signal-to-noise ratio (above 3 pH units) for the microreactor’s output signal. Research limitations/implications – The presented research is a preliminary work which is focused on the fabrication of the LTCC-based microfluidic module, with an integrated heater and immobilized enzyme for urea determination. The device was positively tested using a model reaction of the hydrolysis of urea. However, urea concentration in real (biological) fluid should also be measured. Practical implications – The development of the LTCC-based microfluidic module for urea determination provides opportunity for the construction of a lab-on-chip, or μTAS-type system, for fast medical diagnoses and the continuous monitoring of various biochemical parameters, e.g. for estimating the effectiveness of hemodialysis. Originality/value – This paper shows the design, fabrication and performance of the novel microfluidic module for urea determination, made with LTCC technology.