Flow past a rotationally oscillating cylinder with an attached flexible filament

Abstract

Experimental studies are conducted on a rotationally oscillating cylinder with an attached flexible filament at a Reynolds number of 150. Parametric studies are carried out to investigate the effect of cylinder forcing parameters and filament stiffness on the resultant wake structure. The diagnostics are flow visualization using the laser-induced fluorescence technique, frequency measurement using a hot film, and characterization of the velocity and vorticity field using planar particle image velocimetry. The streamwise force and power are estimated through control volume analysis, using a modified formulation, which considers the streamwise and transverse velocity fluctuations in the wake. These terms become important in a flow field where asymmetric wakes are observed. An attached filament significantly modifies the flow past a rotationally oscillating cylinder from a Bénard–Kármán vortex street to a reverse Bénard–Kármán vortex street, albeit over a certain range of Strouhal number, $St_{A} \sim 0.25\text {--}0.5$ , encountered in nature in flapping flight/fish locomotion and in the flow past pitching airfoils. The transition from a Kármán vortex street to a reverse Kármán vortex street precedes the drag-to-thrust transition. The mechanism of unsteady thrust generation is discussed. Maximum thrust is generated at the instants when vortices are shed in the wake from the filament tip. At $St_{A} > 0.4$ , a deflected wake associated with the shedding of an asymmetric vortex street is observed. Filament flexibility delays the formation of an asymmetric wake. Wake symmetry is governed by the time instant at which a vortex pair is shed in the wake from the filament tip.