The effect of various automatic cluster removal switch-point settings on milking and overmilking duration and total, peak and overmilking claw vacuum in dairy cows

Abstract

AbstractThis research communication describes the effect of three automatic cluster removal (ACR) switch-point settings on machine-on time, overmilking duration, and the mean, peak-flow and overmilking vacuums. The objective was to reduce the overmilking and milking time, attaining a lower mean claw vacuum during overmilking. In a randomised experiment, 25 cows were subjected to three ACR switch-point settings at flow rates of 0.840 kg/min, 0.630 kg/min and 0.504 kg/min each for 15 morning-milkings. Pre-milking preparations and cow comfort were observed and evaluated, showing evidence that the switch-point setting of 0.840 kg/ml denoted the least proportion of behavioural problems (1.1% ± 0.6) compared to the settings at 0.640 kg/ml (16.0% ± 2.2) and 0.504 kg/ml (9.4% ± 1.7). A VaDia device (Biocontrol) determined the machine-on time and vacuum levels at the claw, mouthpiece and pulsator chamber. The machine-on time varied from 290 ± 72.8 (mean ± sd) to 289 ± 64.4 and 303 ± 66.3 for the 0.840, 0.630 and 0.504 kg/min settings, respectively. Overmilking was shortened by 29.3% and 26.4% and the claw vacuum during overmilking was reduced by 3.7 kPa and 4.3 kPa when using the 0.840 kg/min switch-point setting, compared to the others. An increased cluster-removal milk flow threshold reduced both overmilking and vacuum level during overmilking, lowering the risk of teat damage. Adapting ACR switch-point settings offers a valuable opportunity to increase parlour efficiency and cow comfort in dairy herds.