Preparation of Li-Doped Indium-Zinc Oxide Thin-Film Transistor at Relatively Low Temperature Using Inkjet Printing Technology

Abstract

Inkjet printing is a very attractive technology for printed electronics and a potential alternative to current high cost and multi-chemical lithography processes, for display and other applications in the electronics field. Inkjet technology can be employed to fabricate organic light emitting diodes (OLED), quantum dots displays, and thin-film transistors (TFTs). Among potential applications, metal oxide TFTs, which have good properties and moderate processing methods, could be prepared using inkjet printing in the display industry. One effective method of improving their electrical properties is via doping. Lithium doping an oxide TFT is a very delicate process, and difficult to get good results. In this study, lithium was added to indium-zinc oxide (IZO) for inkjet printing to make oxide TFTs. Electrical properties, transfer and output curves, were achieved using inkjet printing even at the relatively low annealing temperature of 200 oC. After optimizing the inkjet process parameters, a 0.01 M Li-doped IZO TFT at 400 oC showed a mobility of 9.08 ± 0.7 cm2/V s, a sub-threshold slope of 0.62 V/dec, a threshold voltage of 2.66 V, and an on-to-off current ratio of 2.83 × 108. Improved bias stability and hysteresis behavior of the inkjet-printed IZO TFT were also achieved by lithium doping.