Effect of Single Crystal Growth and Solidification Grain Boundaries on Weld Solidification Cracking Behavior of CMSX-4 Superalloy

Abstract

Single-crystal superalloys have been popularly employed in high-temperature parts of gas turbines, such as blades. However, the welds of such alloys are highly susceptible to solidification cracking, which limits their applicability to high-temperature turbine blades. In this study, the effects of characteristics of weld solidification on solidification cracking susceptibilities (solidification brittle temperature range, BTR) were fundamentally investigated for the CMSX-4 single-crystal superalloy. We applied a transverse-Varestraint test procedure for both the linear and oscillated arc welds by changing the weld solidification characteristics, such as the degree of single crystal growth and formation of solidification grain boundaries. The BTR for the CMSX-4 alloy is 336 K for linear welding condition, whereas the values are 434 K and 342 K for 0.6 and 1.5 Hz oscillated welds. Interestingly, the BTR continuously increases with the weld oscillation frequency. By contrast, almost no changes in the weld mushy-zone temperature range are theoretically calculated for each welding condition via the diffusion-controlled Scheil model. The mechanism underlying the increase in BTR under oscillation welding is clarified based on the relationship between the achievement ratio of the weld single crystal growth and fraction of high-angle (>15^o) solidification boundaries, which affect severe dendrite coalescence undercooling. The lower fraction of the high-angle weld solidification grain boundaries attributed to the superior achievement ratio of weld single crystal growth, which reduces the dendrite coalescence undercooling and BTR. Consequently, it enhances the solidification crack propagation resistance.