ACCOMPLISHMENT OF COMPLEX OF ABLUTION OF BLAST FURNACES AT PC INJECTION AND USAGE OF CHARGE MATERIALS OF VARIABLE QUALITY-Reference-Cited by-同舟云学术

ACCOMPLISHMENT OF COMPLEX OF ABLUTION OF BLAST FURNACES AT PC INJECTION AND USAGE OF CHARGE MATERIALS OF VARIABLE QUALITY

Published:2021-12-28 Issue:12 Volume:77 Page:1239-1252
ISSN:2619-0753
Container-title:Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information
language:
Short-container-title:Černaâ metallurgiâ. Bûlletenʹ naučno-tehničeskoj informacii

Author:

SEMENOV YU. S.¹,GORUPAKHA V. V.¹,VASHCHENKO S. V.¹,KHUDYAKOV A. YU.¹,SHUMEL’CHIK E. I.¹

Affiliation:

1. Institute of Ferrous Metallurgy after Z.I. Nekrasov NAN of Ukraine (IChM)

Abstract

Operation of blast furnaces (BF) at injection of pulverized coal (PC) and usage of charge materials of nonstable quality results in increasing of slag melt heterogeneity, disturbance of gas-dynamic and heat mode of melt, accompanied by increase of total and lower gas pressure drop along the BF height, nonuniformity of adjacent melt products tappings by mass, chemical composition and temperature, increased burning of air tuyeres. As experience shows, this results in a necessity to arrange special and complex ablutions of the BF hearth to remove coke destruction products and unburnt particles of PC. Property features of ablution materials and regulation of their application considered. Results of ablution of the hearth, coke packing and BF profile of the steel-works in Kamenskoye, Dnepropetrovsk region (now – PJSC DKKhZ MP, before August of 2021 – PJSC “Dnepr steel-works”) presented. Based on comparative analysis of the results of ablution with application of various materials including high-protoxidic sinter and iron-containing briquettes, it was established that mixture of sinter and pellets with iron-containing briquettes were most effective kinds of ablution compositions. A positive experience of manganese-containing materials in BF charge application on continuing basis was considered. The availability of a method of cold roll briquetting for ablution materials agglomeration was shown. The results presented testify to efficiency of the ablution materials application at BF under conditions of their operation with variable charge, fuel and technological parameters. Observation of regulation of ablution accomplishment enables to provide stable operation of BF and reaching required technical and economic indices

Publisher

South Ural State University

Subject

General Medicine

Reference21 articles.

1. Semenov Yu.S., Shumelchik E.I., Horupakha V.V. Diagnostics and Control of Blast-Furnace Melting under the Variable Fuel and Raw Material Conditions. Dnіpro: Domіnanta Prіnt, 2018, 260 p. (In Ukr.).

2. Semenov Yu.S., Podkorytov A.L., Gorupakha V.V., Semion I.Yu., Orobtsev A.Yu., Shumel’chik E.I. Efficiency increase of powdered coal application at hot metal production and limestone calcination under unstable technology conditions. Cher-naya metallurgiya. Byulleten’ nauchno-tekhnicheskoi i ekonomicheskoi informatsii = Ferrous metallurgy. Bulletin of scientific, technical and economic information, 2020, no. 7, pp. 676–690. (In Russ.).

3. Semenov Yu.S., Podkorytov A.L., Horupakha V.V. etc. New scientific and applied results of studies efficiency use of pulverized coal in the production of cast iron and lime burning. Metal ta littya Ukraїni, 2020, no. 2, pp. 15–26. (In Ukr.).

4. Bol’shakov V.I., Ivancha N.G., Nesterov A.S. etc. Development of measures to extend the campaign of blast furnaces by improving the charging technology, slag mode and automated control of blast furnace smelting parameters in conditions of unstable quality of charge materials. Sbornik nauchnykh statei po rezul’tatam, poluchennym v 2013–2015 gg. po tselevoi kompleksnoi programme NAN Ukrainy “Problemy resursa i bezopasnosti ekspluatatsii konstruktsii, sooruzhenii i mashin” [Collection of scientific articles based on the results obtained in 2013–2015 on the target complex program of the National Academy of Sciences of Ukraine “Problems of the resource and safety of operation of structures, structures and machines”]. Institut elektrosvarki im. E.O. Patona NAN Ukrainy, Kiev, 2015, pp. 628–634. (In Russ.).

5. Timoshenko V.I., Kucherov V.I., Osipov B.D. etc. Flushing the hearth of a blast furnace with a high-oxide sinter. Stal’, 1989, no. 2, pp. 11–14. (In Russ.).