Affiliation:
1. Z.I. Nekrasov Institute of Ferrous Metallurgy, NAN of Ukraine
2. PJSC “Dnepr steel-works”
Abstract
Operation of Ukraine ferrous metallurgy under conditions of dependence on import and instability of energy carriers supply, shortage of investments in modernization of production equipment, make the matter of cooperation between steel-works and research organization particularly actual. Basic results of cooperation between Z.I. Nekrasov Institute of Ferrous metallurgy, NAN of Ukraine and Dnepr steel-works in 2017–2019 on blast sfurnace operation pefection and technology of powdered coal injection into rotating limestone calcination furnaces. Results of the finding of the powdered coal optimal consumption shown, which ensure a high efficiency of the coke substitution, reaching of maximum possible blast furnace productivity as well as satisfactory utilization degree of the reducing gas ability. Results of implementation of a complex of measures presented, which ensure a rational distribution of the powdered coal by BF air tuyeres for making the heat conditions of the tuyere zone even by the blast furnace circle. Efficiency of application of technology of joint injection the powdered coal and natural gas was shown, which is achieved by improving the powdered coal combustion conditions in case of increase their mixing degree. Recommendations quoted for blast furnaces starting-up after their idling for a period exceeding the permissible one, without tapping the plug hot metal. The recommendations ensure an accident-free putting a blast furnace into operation followed by reaching planned parameters. Results of usage sensors information, measuring temperature of gas flow above the charge surface presented. The results allow to prove the correction of blast furnace charging mode by an expert module, generating correction impact to support control actions by technological personal. A complex of measures formed to prevent a disturbance of a blast furnace running in case of powdered coal injection in an amount exceeding 140 kg/t of hot metal and without application of special washover materials. The results of efficiency of the mastered technology, envisaging application manganese-bearing materials at a constant base, were shown. Results of diagnostics of workability of the facility for powdered coal injection into rotating limestone calcinating furnace presented, followed by elaboration recommendation on correction parameters of injection facility operation.
Reference24 articles.
1. Semenov Yu.S., Shumel’chik E.І., Gorupakha V.V. Dіagnostika ta upravlіnnya domennoyu plavkoyu v zmіnnikh palivnosirovinnikh umovakh [Diagnostics and Control of Blast-Furnace Melting under the Variable Fuel and Raw Material Condition]. Dnipro: Dominanta Print, 2018. 260 p. (In Ukr.).
2. Semenov Yu.S. Elaboration and realization of new approaches to diagnostic and control of blast furnace heat. Chernaya metallurgiya. Byulleten’ nauchno-tekhnicheskoi i ekonomicheskoi informatsii = Ferrous metallurgy. Bulletin of scientific, technical and economic information, 2020, no. 2, pp. 123–131. (In Russ.).
3. Kanaev V.V., Kobeza I.I., Buzoverya M.T. etc. Monitoring the distribution of blast over the air tuyeres of a blast furnace. Metallurgicheskaya i Gornorudnaya Promyshlennost’, 1995, no. 2, pp. 69–71. (In Russ.).
4. Bol’shakov V.I., Shuliko S.T., Kanaev V.V. etc. Study of the charge and gas-flow distributions in a large blast furnace with a bell-less charging apparatus. Metallurgist, 1997, vol. 41, no. 12, pp. 389–390.
5. Bol’shakov V.I., Shuliko S.T., Lebed’ V.V. Distributing of blowing on a circumference in a high furnace by volume of 5000 m3 during its work. Metallurgicheskaya i Gornorudnaya Promyshlennost’, 2005, no. 2, pp. 10–13. (In Russ.).
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献