Author:
Noor Norramlee Mohamed,Aris Ishak,Misron Norhisam,Shafie Suhaidi,Iqbal Parvez
Abstract
This research aimed to analyse the linear launcher motor (LM) for the light electric vehicle (EV) application that generated a linear movement. LM will replace the piston engine and eliminate the internal combustion engine (ICE) issues namely engine weight and friction at piston wall. The finite element magnetic softwares (FEMs) for a magnetic field was described in this study by predicting the magnetic flux relationship using a 2D J-Mag software. In addition the finite element (FE) analysis was used to simulate the linear launcher motor by using MATLAB/Simulink software. The results show that the linear launcher motor can generate the axial force, speed, and displacement of with and without load. The maximum force without load was ~1.6kN while force with load was ~1.4kN at 100A supplied. The comparison between the force without load and load force was different by12.5%.
Publisher
Universiti Putra Malaysia
Subject
General Earth and Planetary Sciences,General Environmental Science
Reference18 articles.
1. Andersson, B. S., (1991). Company perspectives in vehicle tribology-Volvo. Tribology Series, Elsevier, 18, 503-506. doi: https://doi.org/10.1016/S0167-8922(08)70168-8
2. Beaty, H. W., & Kirtley, J. L. (1998). Electric motor handbook. New York, USA: McGraw-Hill Education.
3. Bedajangam, S. K., & Jadhav, N. P. (2013). Friction losses between piston ring-liner assembly of internal combustion engine: A review. International Journal of Scientific and Research Publications, 3(6), 1-3.
4. Bolander, N.W., Steenwyk, B. D., Sadeghi F., & Gerber, G. R., (2005). Lubrication regime transitions at the piston ring-cylinder linear interface. Procedings IMechE Part J: Engineering Tribology, 219(1),19-31. doi: https://doi.org/10.1243/135065005X9664
5. Chan, C. (1996, August 9). An overview of electric vehicle technology-challenges and opportunities. In Proceedings of the 22nd International Conference on Industrial Electronics, Control, and Instrumentation (pp. 1-6). Taipei, Taiwan. doi: 10.1109/IECON.1996.570892