Effect of water jet erosion parameters on erosion rate of WC10Ni5Cr HVOF coated 35CrMo steel-Reference-Cited by-同舟云学术

Effect of water jet erosion parameters on erosion rate of WC10Ni5Cr HVOF coated 35CrMo steel

Published:2024-02-27 Issue:6 Volume:66 Page:930-947
ISSN:0025-5300
Container-title:Materials Testing
language:en
Short-container-title:

Author:

Pradeep Raj Rajendran¹,Thirumalaikumarasamy Duraisamy²^ORCID,Sonar Tushar³^ORCID,Pavendhan Rajangam⁴^ORCID

Affiliation:

1. Department of Manufacturing Engineering , Annamalai University , Chidambaram , Tamil Nadu , 608002 , India

2. Department of Manufacturing Engineering, Annamalai University , Chidambaram , Tamil Nadu, 608002 , India

3. Department of Welding Engineering , Institution of Engineering and Technology, South Ural State University (National Research University) , Chelyabinsk , 454080 , Russian Federation

4. Department of Mechanical Engineering , ARM College of Engineering & Technology , Chennai , 603209 , Tamil Nadu , India

Abstract

Abstract This research work aims for developing the water jet erosion (WJE) prediction equation and analyzing the optimum water jet erosion parameters such as impingement angle (degree), water jet velocity (m s−1), stand-off distance (mm), and erodent discharge rate (g min−1) for minimizing the water jet erosion of 35CrMo steel coated with WC10Ni5Cr coating. The optimized high velocity oxy fuel (HVOF) process parameters were employed for developing the coating of WC10Ni5Cr on 35CrMo steel. The WJE prediction equations were checked for its validity employing analysis of variance (ANOVA). The water jet erosion was measured as the loss of mass (g) after water jet erosion testing for noncoated and coated 35CrMo steel substrates. From the results it was analyzed that the noncoated and coated 35CrMo steel substrates when subjected to the impingement angle of 60°, water jet velocity of 15 m s−1, stand-off distance of 40 mm, and erodent discharge rate of 1500 g min−1 displayed lower mass loss of 0.0177 g and 0.0079 g. The coated 35CrMo steel substrate showed 55.36 % decrement in erosion compared to noncoated 35CrMo steel substrate. These findings support the employability of WC10Ni5Cr HVOF coating for 35CrMo steel to improve its water jet erosion resistance in engineering applications.

Publisher

Walter de Gruyter GmbH

Link

https://www.degruyter.com/document/doi/10.1515/mt-2023-0243/pdf

Reference48 articles.

1. X. B. Liu, J. J. Kang, W. Yue, Z. Q. Fu, L. N. Zhu, D. S. She, and C. B. Wang, “Performance evaluation of HVOF sprayed WC-10Co4Cr coatings under slurry erosion,” Surf. Eng., vol. 35, no. 9, pp. 816–825, 2019, https://doi.org/10.1080/02670844.2019.1568661.

2. J. F. Santa, J. C. Baena, and A. Toro, “Slurry erosion of thermal spray coatings and stainless steels for hydraulic machinery,” Wear, vol. 263, nos. 1–6, pp. 258–264, 2007, https://doi.org/10.1016/j.wear.2006.12.061.

3. P. R. Rajendran, T. Duraisamy, R. S. Chidambaram, A. Mohankumar, S. Ranganathan, G. Balachandran, and L. Renjith, “Optimisation of HVOF spray process parameters to achieve minimum porosity and maximum hardness in WC-10Ni-5Cr coatings,” Coatings, vol. 12, no. 3, pp. 339–359, 2022, https://doi.org/10.3390/coatings12030339.

4. J. Huang, “Study on tribological properties of 35CrMo steel after laser textured,” Optik, vol. 226, no. 1, 2021, Art. no. 165437, https://doi.org/10.1016/j.ijleo.2020.165437.

5. S. Hong, Y. Wu, W. Gao, J. Zhang, and Y. Zheng, “Slurry erosion-corrosion resistance and microbial corrosion electrochemical characteristics of HVOF sprayed WC-10Co-4Cr coating for offshore hydraulic machinery,” Int. J. Refract. Metals Hard Mater., vol. 74, pp. 7–13, 2018, https://doi.org/10.1016/j.ijrmhm.2018.02.019.

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effect of water jet erosion parameters on erosion rate of WC10Ni5Cr HVOF coated 35CrMo steel;Materials Testing;2024-02-27