Author:
Kim Sanghoon,Chung Hyup Jae,Rhee Kyongyop
Abstract
Abstract
An image processing technique was used to model the internal structure of aluminum foam in finite element analysis in order to predict the compressive behavior of the material. Finite element analysis and experimental tests were performed on aluminum foam with densities of 0.2, 0.25, and 0.3 g/cm3. It was found that although the compressive strength predicted from the finite element analysis was higher than that determined experimentally, the predicted compressive stress-strain curves exhibited a tendency similar to those determined from experiments for both densities. However, the behavior of the predicted compressive stress-strain curves was different from the experimental one as the applied strain increased. The difference between predicted and experimental stress-strain curves in a high strain range was due to contact between broken aluminum foam walls by the large deformation.
Reference16 articles.
1. Numerical investigation of influences of porous density and strain - rate effect on dynamical responses of aluminum foam;Liu;Computational Materials Science,2014
2. Model for determining mechanical properties of aluminum closed - cell foams;Konstantinidis;Theoretical and Applied Fracture Mechanics,2005
3. The influence of cell - size distribution on the plastic deformation in metal foams;Kenesei;Scripta Materialia,2004
4. Bending crush resistance of partially foam - filled sections;Santosa;Advanced Engineering Materials,2000
5. Tensile fracture behavior of foamed metallic materials and;Liu;Materials Science Engineering,2004
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献