Affiliation:
1. Shaanxi Province , P. R. China
Abstract
Abstract
Selective laser melting at various laser inclination angles was used to prepare Hastelloy X alloy specimens. The morphology, fracture, tensile strength, stress, and strain of Hastelloy X alloy specimens were studied using optical microscopy, scanning electron microscopy, and a tensile tester. The temperature field of the manufacturing process was analyzed based on finite element analysis, and the internal relationship between the temperature field and the process was constructed in terms of cooling speed. The results show that the temperature field is a dynamic process with a high cooling rate; the average cooling rate reaches 3.23 × 106 °C × s−1. The greater the inclination angle, the greater the thermal gradient, resulting in higher cooling rates. Due to the cross-influence of grain refinement at high cooling rates and residual stress, the tensile strength and yield strength of Hastelloy X alloy showed first increasing and then decreasing trends with respect to inclination angle. However, at an inclination angle of 30°, the voids and crack defects of Hastelloy X alloy fractures were reduced, and the tensile strength and yield strength reached 881.38 and 701.60 MPa, respectively. At this angle, the mechanical properties were excellent and met the requirements of the aviation industry.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference23 articles.
1. Y. B. Sun, P. L. Jin, J. H. Ma, J. He, J. H. Cui, K. R. Zhou, M. Q. Cui: Effect of heat treatment on microstructure and properties of Hastelloy X welded joints, Rare Metal Materials and Engineering 48 (2018), No. 5, pp. 3029-3034 (in Chinese)
2. J. C. Zhao, M. Larsen, V Ravikumar: Phase precipitation and time–temperature-transformation diagram of Hastelloy X, Materials Science and Engineering A 293 (2000), pp. 112-119 DOI:10.1016/S0921-5093(00)01049-2
3. O. O. Ojo, E. Taban: Microstructure, mechanical and corrosion behavior of additively manufactured steel: A review (Part 1), Materials Testing 62 (2020), No. 5, pp. 503-516 DOI:10.3139/120.111507
4. P. Striemann, D. Huelsbusch, S. Mrzljak, M. Niedermeier, F. Walther: Systematic approach for the characterization of additive manufactured and injection molded short carbon fiber-reinforced polymers under tensile loading, Materials Testing 62 (2020), No. 6, pp. 561-567 DOI:10.3139/120.111517
5. A. Lutz, L. Huber, C. Emmelmann: Strain-rate dependent material properties of selective laser melted AlSi10Mg and AlSi3.5Mg2.5, Materials Testing 62 (2020), No. 6, pp. 573-583 DOI:10.3139/120.111518
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献