Pulsed IR Heating of Thermoplastic Sheets for Thermoforming Applications
Author:
Buffel B.1, Leeman K.1, Desplentere F.1
Affiliation:
1. KU Leuven Campus Brugge , Brugge , Belgium
Abstract
Abstract
This study presents the pulsed heating strategy as an advancement of the current state of the art in industry towards the theoretically fastest method of heating a thermoplastic sheet. Experimental temperature measurements are combined with an explicit finite difference numerical model to describe the pulsed heating method and indicate its added value in IR heating of thermoplastic sheets. Different process settings are evaluated and indicate the effect of the applied heat flux and the time interval tOFF during pulsed heating. When switched off, the residual heating of the heater elements is able to partially compensate for the convective heat losses at the surface of the sheet. This results in a more uniform temperature distribution through thickness without slowing down the overall heating process. The study shows that this effect is lost when the time interval in which the heater element is switched off, increases. Applying pulsed heating opens up a large processing window to control the through-thickness temperature difference. When the total amount of applied thermal energy is taken into account, pulsed heating is able to increase the overall heating rate and simultaneously keep the temperature difference through thickness limited.
Publisher
Walter de Gruyter GmbH
Subject
Materials Chemistry,Industrial and Manufacturing Engineering,Polymers and Plastics,General Chemical Engineering
Reference33 articles.
1. Boztepe, S., Gilblas, R., De Almeida, O., Gerlach, C., Le Maoult, Y. and Schmidt, F., "The Role of Microcrystalline Structure on Optical Scattering Characteristics of Semi-Crystalline Thermoplastics and the Accuracy of Numerical Input for IR-Heating Modeling", Int. J. Mater. Form., 11, 717–727 (2018), DOI:10.1007/s12289-017-1386-z 2. Boztepe, S., De Almeida, O., Gilblas, R., Le Maoult, Y., Schmidt, F. and Gerlach, C., "A Combined Experimental and Numerical Approach for Radiation Heat Transfer in Semi-Crystalline Thermoplastics", Int. J. of Therm. Sci., 142, 142–155 (2019), DOI:10.1016/j.ijthermalsci.2019.04.020 3. Brogan, M. T., Monaghan, P. F., "Thermal Simulation of Quartz Tube Infra-Red Heaters Used in the Processing of Thermoplastic Composites", Composites Part A, 27A, 301–306 (1996), DOI:10.1016/1359-835X(95)00056-° 4. Buffel, B., Desplentere, F., "A Numerical Study on Different Heating Strategies in Thermoforming of Thermoplastic Sheets", Proceedings of the Polymer Moulds & Innovation Conference, Ghent, p. 221–226 (2016) 5. Buffel, B., van Mieghem, B., van Bael, A. and Desplentere, F. "A Combined Experimental and Modelling Approach towards an Optimized Heating Strategy in Thermoforming of Thermoplastic Sheets", Int. Polym. Proc. 32, 378–386 (2017), DOI:10.3139/217.3370
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|