Affiliation:
1. Department of Textile Engineering, Yazd University, Yazd , Iran
2. Swedish Center for Resource Recovery, University of Borås, 50190 Borås , Sweden
Abstract
Abstract
In this study, we used an experimental design to investigate the influence of the total draft, break draft, distance between the aprons (Clips) and production roller pressure on yarn quality in order to obtain optimum drafting conditions for polyester and viscose (PES/CV) blend yarns in ring spinning frame. We used PES fibers (1.4 dtex × 38 mm long) and CV fibers (1.6 dtex × 38 mm long) to spin a 20 Tex blend yarn of PES (70%)/CV (30%) blend ratio. When the break draft, adjustment of distance between of aprons and roller pressure is not reasonable, controlling and leading of the fibers is not sufficient for proper orientation of the fibers in the yarn structure to produce a high quality yarn. Experimental results and statistical analysis show that the best yarn quality will be obtained under drafting conditions total draft of 38, 1.2 break draft, 2.8 mm distance between of aprons and maximum pressure of the production top roller (18daN).
Subject
General Materials Science
Reference12 articles.
1. [1] Klein, W. (1987). Short Staple Spinning Series (Manual of Textile Technology), Vole 4, A Practical Guide to Ring Spinning, The Textile Institute, UK (Manchester).
2. [2] Grishin P.F. (1945). A Theory of Drafting and Its Practical Application. Journal of Textile Institute, 45, 167-267.
3. [3] Martindale, J.G. (1947). An instrument for measurement of the forces operating between fibers during drafting. Journal of Textile Institute, 38, 151-166.
4. [4] Roder, H. L. (1958). The Evaluation of the Spinning Properties of Man-made Staple fibers. Textile Research Journal, 28, 819-839.
5. [5] Audivert, R. (1974). The Relation between the Drafting Force, Draft, and Setting in the roller-drafting of staple-fiber slivers. Journal of Textile Institute, 65, 325-327.
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献