Affiliation:
1. Technical University of Kosice
Abstract
Abstract
The presented paper provides the alternative options for determining the condition of belt gear based on the testing and monitoring. In order to carry out experimental measurements, a newly developed device for testing, monitoring and diagnostics of belt drives was designed, as well as the possibility of determination of limit states by extreme loads. The designed measuring stand allows to determine the point of destruction of the belt for an extreme load. The main objective of the experimental measurement was to determine the slip of the wedge-shaped belt. The slip was evaluated by the coefficient of belt creeping and the specific belt slip by means of the measuring stand. The measurements on the proposed device can be made when the input speed from the electric motor and the transmitted torque of the belt gear are constant while the tensioning force of the belt drive is changing or the measurements can be made when the tensioning force and input speed of the belt drive are constant and the torsional moment changes. The monitoring of specified parameters for determining the belt gear slip is made by means of sensors located at predetermined locations from which data is processed by a PC. In the paper, the analytical calculation is processed, from which the values are compared with the values measured on the proposed device.
Subject
Management of Technology and Innovation,Industrial and Manufacturing Engineering,Management Information Systems
Reference21 articles.
1. [1] M. Balazikova, and M. Dulebova. “Comparative study of noise measurement in work environment with frequency weightings”. Science. Business. Society, 2017, Vol. 2, No. 3, pp. 132-135. ISSN 2367-8380.
2. [2] B. Balta, F. O. Sonmez, A. Cengiz. „Speed losses in V-ribbed belt drives, Mechanism and Machine Theory”, Publisher Elsevier Ltd, 2015, pp. 1-14., ISSN 0094-114X.
3. [3] N.T.H. Cam, V.N. Pi, N.K. Tuan, L.X. Hung, T.T.P. Thao. “Determining optimal partial transmission ratios of mechanical driven systems using a V-Belt drive and a helical reducer with second-step double gear-sets.” Lecture Notes in Networks and Systems, Volume 63, 2019, pp. 261-269, Publisher Springer, ISSN 23673370.
4. [4] T.C. Firbank. “Mechanics of the belt drive.” International Journal of Mechanical Sciences, 12 (12), 1970, pp. 1053-1063., ISSN 0020-7403.
5. [5] S. Gaspar, and J. Pasko. “Influence of technological factors of die casting on mechanical properties of castings from silumin.” Lecture Notes in Electrical Engineering, Vol. 240, 2013, pp. 713-722, ISSN 1876-1100.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献