The Effects of the Welding Parameters on Tensile Properties of RSW Junctions of DP1000 Sheet Steel-Reference-Cited by-同舟云学术

The Effects of the Welding Parameters on Tensile Properties of RSW Junctions of DP1000 Sheet Steel

Published:2018-08-18 Issue:4 Volume:8 Page:3116-3120
ISSN:1792-8036
Container-title:Engineering, Technology & Applied Science Research
language:
Short-container-title:Eng. Technol. Appl. Sci. Res.

Author:

Elitas M.,Demir B.

Abstract

In this study, the maximum tensile shear load bearing capacity of the resistance spot welded DP1000 steel was measured and the tensile shear properties of the joints were evaluated. The effects of different welding parameters on microstructure, microhardness and tensile shear properties were investigated. Weld processes were performed by using 5kA and 7kA weld currents and 2-6bar electrode pressures. The microstructure of the welded materials was evaluated and the hardness profiles were determined. Experimental results showed that increasing electrode pressure and weld current increased the tensile shear load bearing capacity. It was also observed that the expulsion had a negative effect on the tensile shear load bearing capacity.

Publisher

Engineering, Technology & Applied Science Research

Link

http://etasr.com/index.php/ETASR/article/download/2115/pdf

Reference25 articles.

1. M. Elitas, B. Demir, O. Yazici, “The effects of the electrode pressure on tensile strength and fracture modes of the RSW junctions of DP600 sheet steel”, 2nd International Conference on Material Science and Technology in Cappadocia, Nevsehir, Turkey, October 11-13, 2017

2. B. Demir, “An investigation on the production of dual-phase steel from AISI 4140 and its impact strength at different martensite volume fractions”, Metallofizika I Noveishie Tekhnologii , Vol. 29, No. 9, pp. 1159-1166, 2007

3. Y. Cho, S. Rhee, “Experimental study of nugget formation in resistance spot welding”, Welding Journal, Vol. 82, No. 8, pp. 195-201, 2003

4. C. A. Campos, M. P. Guerrero-Mata, R. Colas, R. Garza, “Weldability of galvannealed interstitial free steel”, ISIJ International, Vol. 42, No. 8, pp. 876-881, 2002

5. F. Hayat, B. Demir, M. Acarer, S. Aslanlar, “Effect of welding time and current on the mechanical properties of resistance spot welded IF (DIN EN 10130–1999) steel”, Metallic Materials, Vol. 47, No. 1, pp. 11-17, 2009

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. An investigation on bending fatigue in a corrosive environment of dual-phase 1000 sheet steel RSW joints and damage model via experiment and numeric analysis;Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering;2024-06-03

2. Analyzing the Influence of Microstructure on the Mechanical Properties of TIG Welded Joints processed by Friction Stir considering the sampling Orientation;Engineering, Technology & Applied Science Research;2024-02-08

3. An Optimization Study on Resistance Spot Welding of DP600 Sheet Steel via Experiment and Statistical Analysis;Engineering, Technology & Applied Science Research;2023-08-09

4. The Effects of Resistance Spot Welding Parameters on the Mechanical Behavior of Stainless Steel;Engineering, Technology & Applied Science Research;2023-04-02

5. Evaluation of the Role of Ethylene Vinyl Acetate on the Thermo-Mechanical Properties of PET/HDPE Blends;Engineering, Technology & Applied Science Research;2022-12-01