Author:
Van Cuong Nguyen,Hoang Anh Le,Long Cao Dang,Hoang Duy Nguyen
Abstract
This study investigates the influence of printing orientation on the surface roughness in metal material extrusion 3D printing of 17-4 PH stainless steel. Experimental tests were conducted on the Markforged Metal X commercial 3D printer at Vinh Long University of Technology Education, Vietnam. The samples were printed in three different orientations: flat, on-edge, and upright. Surface roughness measurements were performed using a handheld Mitutoyo SJ-210 roughness tester. Quantitative analysis of the surface roughness measurements revealed significant variations among the different printing orientations. The upright orientation exhibited the smoothest surface, with an average Ra value of 7.42 μm and Rz value of 40.49 μm. In contrast, the flat orientation showed the highest roughness, with an average Ra value of 82.83 μm and Rz value of 109.32 μm. The on-edge orientation had intermediate roughness values, with an average Ra value of 69.42 μm and Rz value of 92.17 μm. The study also introduces a novel predictive model for surface roughness based on the printing parameters. The model demonstrated accurate estimations for surface roughness values in specific cases, enabling optimization of the printing process for desired surface quality.
Publisher
Engineering, Technology & Applied Science Research
Reference14 articles.
1. R. Citarella and V. Giannella, "Additive Manufacturing in Industry," Applied Sciences, vol. 11, no. 2, Jan. 2021, Art. no. 840.
2. D. G. Zisopol, D. V. Iacob, and A. I. Portoaca, "A Theoretical-Experimental Study of the Influence of FDM Parameters on PLA Spur Gear Stiffness," Engineering, Technology & Applied Science Research, vol. 12, no. 5, pp. 9329–9335, Oct. 2022.
3. D. G. Zisopol, I. Nae, A. I. Portoaca, and I. Ramadan, "A Statistical Approach of the Flexural Strength of PLA and ABS 3D Printed Parts," Engineering, Technology & Applied Science Research, vol. 12, no. 2, pp. 8248–8252, Apr. 2022.
4. D. G. Zisopol, M. Minescu, and D. V. Iacob, "A Theoretical-Experimental Study on the Influence of FDM Parameters on the Dimensions of Cylindrical Spur Gears Made of PLA," Engineering, Technology & Applied Science Research, vol. 13, no. 2, pp. 10471–10477, Apr. 2023.
5. L. Cherdo, "Metal 3D printers in 2023: a comprehensive guide," Aniwaa, Jun. 2022. https://www.aniwaa.com/buyers-guide/3d-printers/best-metal-3d-printer/.