A Statistical Approach of the Flexural Strength of PLA and ABS 3D Printed Parts-Reference-Cited by-同舟云学术

A Statistical Approach of the Flexural Strength of PLA and ABS 3D Printed Parts

Published:2022-04-09 Issue:2 Volume:12 Page:8248-8252
ISSN:1792-8036
Container-title:Engineering, Technology & Applied Science Research
language:
Short-container-title:Eng. Technol. Appl. Sci. Res.

Author:

Zisopol D. G.,Nae I.,Portoaca A. I.,Ramadan I.

Abstract

The need for rapid obtaining parts has made researchers to widely study 3D common printing technologies like FDM (Fused Depositing Modeling), SLS (Selective Laser Sintering), SLA (Stereolithography). Although FDM can provide high geometrical complexity of parts at convenient costs and with efficient delivery logistics, a set of printing parameters of the raw materials used for manufacturing needs to be optimized accordingly. Therefore, this study reveals the influence of printing parameters on the flexural strength of PLA (Polylactic Acid) and ABS (Acrylonitrile Butadiene Styrene) printed samples, by applying the Taguchi method and ANOVA (Analyisis of Variance) of 3-point bending tests results.

Publisher

Engineering, Technology & Applied Science Research

Subject

General Medicine

Reference17 articles.

1. J. C. Camargo, Á. R. Machado, E. C. Almeida, and E. F. M. S. Silva, "Mechanical properties of PLA-graphene filament for FDM 3D printing," The International Journal of Advanced Manufacturing Technology, vol. 103, no. 5, pp. 2423–2443, Dec. 2019.

2. D. Popescu, A. Zapciu, C. Amza, F. Baciu, and R. Marinescu, "FDM process parameters influence over the mechanical properties of polymer specimens: A review," Polymer Testing, vol. 69, pp. 157–166, May 2018.

3. O. A. Mohamed, S. H. Masood, and J. L. Bhowmik, "Optimization of fused deposition modeling process parameters: a review of current research and future prospects," Advances in Manufacturing, vol. 3, no. 1, pp. 42–53, Nov. 2015.

4. X. Liu, M. Zhang, S. Li, L. Si, J. Peng, and Y. Hu, "Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method," The International Journal of Advanced Manufacturing Technology, vol. 89, no. 5, pp. 2387–2397, Nov. 2017.

5. T. N. A. T. Rahim, A. M. Abdullah, and H. Md Akil, "Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites," Polymer Reviews, vol. 59, no. 4, pp. 589–624, Jul. 2019.

Cited by 26 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The Influence of Printing Materials on Shrinkage Characterization in Metal 3D Printing using Material Extrusion Technology;Engineering, Technology & Applied Science Research;2024-08-02

2. Assessing Wear Coefficient and Predicting Surface Wear of Polymer Gears: A Practical Approach;Engineering, Technology & Applied Science Research;2024-08-02

3. Accelerated testing of the Wear Behavior of 3D-printed Spur Gears;Engineering, Technology & Applied Science Research;2024-06-01

4. Study of the Injection of Secondary Air into the Intake Manifold of the Gas Turbine to Avoid the Compressor Surging Phenomenon;Engineering, Technology & Applied Science Research;2024-04-02

5. A Study on the Influence of FDM Parameters on the Compressive Behavior of PET-G Parts;Engineering, Technology & Applied Science Research;2024-04-02