Experimental investigation of subcooled flow boiling of a 50/50 ethylene glycol/water mixture in finned rectangular aluminum channels-Reference-Cited by-同舟云学术

Experimental investigation of subcooled flow boiling of a 50/50 ethylene glycol/water mixture in finned rectangular aluminum channels

Published:2018-04-06 Issue:6 Volume:31 Page:482-494
ISSN:0891-6152
Container-title:Experimental Heat Transfer
language:en
Short-container-title:Experimental Heat Transfer

Author:

Yu Wenhua¹,France David M.¹²,Singh Dileep¹,Zhao Weihuan¹³

Affiliation:

1. Energy Systems Division, Argonne National Laboratory, Argonne, IL, USA

2. Department of Mechanical and Industrial Engineering, University of Illinois at Chicago, Chicago, IL, USA

3. Department of Mechanical and Energy Engineering, University of North Texas, Denton, TX, USA

Funder

U.S. Department of Energy's Vehicle Technologies Office

Publisher

Informa UK Limited

Subject

Electrical and Electronic Engineering,Instrumentation,Control and Systems Engineering

Link

https://www.tandfonline.com/doi/pdf/10.1080/08916152.2018.1451412

Reference17 articles.

1. S. Narumanchi, V. Hassani, and D. Bharathan, Modeling single-phase and boiling liquid jet impingement cooling in power electronics, Technical Report, NREL/TP-540-38787, National Renewable Energy Laboratory, Golden, CO, 2005.

2. Numerical simulations of nucleate boiling in impinging jets: Applications in power electronics cooling

3. Local two-phase heat transfer from arrays of confined and submerged impinging jets

4. Two-Phase Spray Cooling of Hybrid Vehicle Electronics

5. J. B. Campbell, A Two-Phase Cooling Method Using R134a Refrigerant to Cool Power Electronics Devices, Master’s thesis, University of Tennessee-Knoxville, Knoxville, TN, 2004.

Cited by 9 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. FLOW BOILING CRITICAL HEAT FLUX IN A SMALL TUBE FOR FC-72;Heat Transfer Research;2024

2. The simulation analysis on the influence of non-closed droplet structure on thermal/ flow performance of pin fin heat sinks;International Journal of Thermal Sciences;2023-09

3. Conventional and topologically optimized polymer manifolds for direct cooling of power electronics;International Journal of Heat and Mass Transfer;2023-02

4. Thermohydraulic performance of Al2O3-water nanofluid during single-phase flow and two-phase subcooled flow boiling;International Journal of Thermal Sciences;2022-09

5. Multi view interferometric tomography measurements of convective phenomena in a differentially-heated nanofluid layer;Experimental Heat Transfer;2022-05-26