Towards automation of wind energy rotor blade production: a review of challenges and application examples-Reference-Cited by-同舟云学术

Towards automation of wind energy rotor blade production: a review of challenges and application examples

Published:2020-10-01 Issue:4 Volume:6 Page:173-190
ISSN:2055-0340
Container-title:Advanced Manufacturing: Polymer & Composites Science
language:en
Short-container-title:Advanced Manufacturing: Polymer & Composites Science

Author:

Ohlendorf Jan-Hendrik¹²³^ORCID,Richrath Marvin¹³,Franke Jan¹³,Brink Michael¹³,Thoben Klaus-Dieter¹³

Affiliation:

1. BIK - Institute for Integrated Product Development, Faculty of Production Engineering, University of Bremen, Bremen, Germany

2. MAPEX - Center for Materials and Processes, University of Bremen, Bremen, Germany

3. ForWind - Center for Wind Energy Research, Universities of Oldenburg, Hannover and Bremen, Oldenburg, Germany

Publisher

Informa UK Limited

Subject

Management of Technology and Innovation,Electrical and Electronic Engineering,Polymers and Plastics

Link

https://www.tandfonline.com/doi/pdf/10.1080/20550340.2020.1838224

Reference151 articles.

1. N N. Report of the Federal Government on Energy Research 2017 - Research Funding for the Energy Transition. Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi); 2017. Available from: https://www.bmwi.de/Redaktion/DE/Publikationen/Energie/bundesbericht-energieforschung-2017.pdf?__blob=publicationFile&v=22.

2. Jones D, Kleiner MM, Buck M, et al. Energy Transition in the Power Sector in Europe: State of Affairs in 2016. Review on the Developments in 2016 and Outlook on 2017. Berlin, Germany: Agora Energiewende; 2017.

3. Albers H. Bundesverband WindEnergie e.V. [Online]; 2020. Available from: https://www.windindustrie-in-deutschland.de/windenergieanlagen/.

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Parametric study on the effect of material properties, tool geometry, and tolerances on preform quality in wind turbine blade manufacturing;Composite Structures;2024-09

2. Investigating the factors influencing the bridging of dry non-crimp fabric on a concave L-shaped mold in an automated draping process;Advanced Manufacturing: Polymer & Composites Science;2024-06-21

3. An accurate forming model for capturing the nonlinear material behaviour of multilayered binder-stabilised fabrics and predicting fibre wrinkling;Composites Part B: Engineering;2024-04

4. That’s how the preform crumples: Wrinkle creation during forming of thick binder-stabilised stacks of non-crimp fabrics;Composites Part B: Engineering;2024-03

5. Wireless, Material-Integrated Sensors for Strain and Temperature Measurement in Glass Fibre Reinforced Composites;Sensors;2023-07-13