Impact of vacuum ultraviolet photons on ultrathin polymethylmethacrylate during plasma etching

Abstract

State-of-the-art extreme ultraviolet lithography requires the use of ultrathin photoresists (or resists) due to pattern stability concerns and reduced depth of focus of the extreme ultraviolet lithography scanners. Current resists for extreme ultraviolet lithography are less than 50 nm thick. These ultrathin resists further complicate pattern transfer as unintended plasma-induced damage during dry etching is more pronounced. A better understanding of the interaction of plasma species with ultrathin resists is critical for enabling pattern transfer of sub-10 nm features. Here, we study the impact of vacuum ultraviolet photons, argon ions, and argon plasma on a 40 nm thick polymethylmethacrylate film. Using a deuterium lamp, an industrial ion beam etch tool, and an industrial inductively coupled plasma etch tool, we exposed the polymer to photons, ions, and plasma, respectively. The exposed samples were then analyzed for chemical and physical changes using different characterization techniques. It was observed that the vacuum ultraviolet photons interact with the entire bulk of polymer film, while the ions only affect the surface and subsurface region. The photon exposed samples formed smaller polymer fragments at low exposure doses and further started to cross-link at high doses. In contrast, the ion modification leads to carbonization of only the top few nanometers of the polymer film, leaving the bottom bulk intact. The plasma exposed sample showed changes characteristic to both vacuum ultraviolet photons and ions and their synergism. It was stratified with a 1.34 ± 0.03 nm thick ion-caused carbonized layer on top of a 13.25 ± 0.12 nm photon-induced cross-linked layer. By studying the impact of plasma photons on ultrathin polymethylmethacrylate, we were able to establish a baseline for a testing methodology that can be extended to novel ultrathin resist platforms.