Characterization of Solder Mechanical Properties Based on Nanoindentation-Reference-Cited by-同舟云学术

Characterization of Solder Mechanical Properties Based on Nanoindentation

Published:2024 Issue: Volume: Page:303-314
ISSN:2195-4356
Container-title:Lecture Notes in Mechanical Engineering
language:en
Short-container-title:

Author:

Sheng Wenjun,Wang Zhihai,Cheng Huiming

Abstract

AbstractThis article systematically elaborates on the in-situ measurement of solder using nanoindentation technology, and combines numerical inversion methods to analyze its elastic–plastic and creep mechanical properties. The elastic–plastic and creep constitutive equations of solder are constructed, and the influence of temperature on the elastic–plastic and creep characteristic of solder is studied. This provides an effective in-situ measurement and analysis method for characterizing the mechanical properties of high-density micro solder interconnection structures in radar electronic equipment.

Publisher

Springer Nature Singapore

Link

https://link.springer.com/content/pdf/10.1007/978-981-97-1876-4_24

Reference14 articles.

1. Marques VMF, Johnston C, Grant PS (2013) Nanomechanical characterization of Sn–Ag–Cu/Cu joints—Part 1: Young’s modulus, hardness and deformation mechanisms as a function of temperature. Acta Mater 61:2460–2470

2. Tabor D (1951) The hardness and strength of metals. J Inst Met 79(1):1–18

3. Yu WP, Blanchard JP (1996) An elastic-plastic indentation model and its solutions. J Mater Res 11(9):2358–2367

4. Dao M, Chollacoop N, Van Vliet KJ et al (2001) Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater 49:3899–3918

5. Viola P, Kei A, Mie O, et al (2023) Evaluation of deformation and fracture behavior in 304L austenitic steel harmonic structures through nanoindentation. Steel Res Int 94(2)