Abstract
AbstractThe presented publication is focused on increasing the productivity and efficiency of machine production of precision holes. Considerable attention was paid to the influence of the pre-preparation and drilling technology on the quality of the reamed hole. The material selected for machining was chromium-molybdenum steel 42CrMo4 QT. The cluster analysis is implemented to evaluate the experimental results obtained by measuring the cylindricity and surface roughness of the drilled and reamed holes. The factor of hole pre-preparation technology was selected in two quality levels, and the factor of drilling technology in four quality levels. The constant factors were carefully controlled during the experiment, i.e., other possible influences were excluded or minimised. Under constant cutting conditions, the experiment of the subject machining process was carried out. The cutting process parameters investigated were the cylindricity and the roughness of the machined surface Ra. The novelty and contribution of this research lie in confirming the assumption that drilling technology influences hole quality primarily, whereas hole pre-preparation technology has a secondary effect.
Funder
Ministerstvo Školství, Mládeže a Tělovýchovy
University of West Bohemia
Publisher
Springer Science and Business Media LLC
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Software,Control and Systems Engineering
Reference45 articles.
1. Motorcu AR, Kuş A, Durgun I (2014) The evaluation of the effects of control factors on surface roughness in the drilling of Waspaloy superalloy. Measurement 58:394–408
2. Sharman ARC, Amarasinghe A, Ridgway K (2008) Tool life and surface integrity aspects when drilling and hole making in Inconel 718. J Mater Process Technol 200:424–432
3. Popa A, Dutilh V, Baili M., Dessein G, Perrin G (2010) Identification of influent factors on surface integrity in nickel-base superalloy drilling. In 19th International Conference on Manufacturing Systems; 11-12 Nov 2010. Bucharest. Romania
4. Aamir M, Tolouei-Rad M, Giasin K, Nosrati A (2019) Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: A review. Int J Adv Manuf Technol 105:2289–2308
5. Pirtini M, Lazoglu I (2005) Forces and hole quality in drilling. Int J Mach Tools Manuf 45:1271–1281
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献