A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

Abstract

AbstractError compensation has become an important means of improving the manufacturing and processing accuracy of computer numerical control (CNC) machine tools. Quick and precise measurement of the various geometric motion errors (GMEs) of CNC machine tools is crucial. We propose a novel laser method for the efficient and direct high-precision measurement of the 21 GMEs of a three-axis CNC machine tool, or three linear axes of a five-axis tool. A corresponding system was developed, comprising a fiber-coupled laser unit, sensor head, target unit, and beam-steering unit. The beam-steering unit was designed to perform high-accuracy 90° rotation of the measuring beam, and the target unit was designed to be sensitive to 18 GMEs of the three linear axes. Stability, repeatability, and comparison experiments were conducted to verify the performance of the proposed system. The results showed that the stability of the position error measurement is ± 6.3 nm. For straightness error measurement, the stability, repeatability error, and residual are within ± 60.3 nm, ± 0.5 μm, and ± 0.7 μm, respectively. These are within ± 0.12 arcsec, ± 0.5 arcsec, and ± 0.5 arcsec for the pitch and yaw measurements, and within ± 0.37 arcsec, ± 1.5 arcsec, and ± 1.0 arcsec for the roll measurements, respectively. For squareness error measurement, the repeatability error and residual are within ± 0.6 arcsec and ± 1.6 arcsec, respectively. Compared with a laser interferometer, the proposed system can measure the 21 GMEs of a three-axis machine tool with one-step installation. Without accuracy loss, the measurement efficiency is approximately 45 times higher than that of a laser interferometer, thus providing a new quick and accurate measurement method of GMEs and error compensation of CNC machine tools.