Effect of temper rolling on the mechanical behaviour of thin steel sheets under monotonous and reverse simple shear tests-Reference-Cited by-同舟云学术

Effect of temper rolling on the mechanical behaviour of thin steel sheets under monotonous and reverse simple shear tests

Published:2009-08 Issue:S1 Volume:2 Page:471-474
ISSN:1960-6206
Container-title:International Journal of Material Forming
language:en
Short-container-title:Int J Mater Form

Author:

Luis Caroline,Gaspérini M.,Bouvier S.,Li J. J.

Publisher

Springer Science and Business Media LLC

Subject

General Materials Science

Link

http://link.springer.com/content/pdf/10.1007/s12289-009-0582-x.pdf

Reference10 articles.

1. Pepelnjak T, Barisic B (2007) Analysis and elimination of the stretcher strains on TH415 tinplate rings in the stamping process. J Mater Process Technol 186:111–119

2. Wilson DV, Bate PS (1994) Influences of cells walls and grain boundaries on transient responses on an IF steel to changes in strain path. Acta Metall Materiala 42:1099–1111

3. Rauch EF, Schmitt JH (1989) Dislocations substructures in mild steel deformed in simple shear. Mater Sci Eng A113:441–448

4. Genevois P (1992) Etude expérimentale et modélisation du comportement plastique anisotrope des tôles d’acier en grandes déformations. Thèse de Doctorat, Institut Polytechnique de Grenoble

5. Bouvier S, Gardey B, Haddadi H, Teodosiu C (2006) Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests. J Mater Process Technol 174:115–126

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Determining the optimal reduction ratio in temper rolling in terms of residual stress distribution across thickness;Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi;2023-10-09

2. How the skin-pass rolling reduction ratio affects the strain aging behaviour of low-carbon steel sheets;Ironmaking & Steelmaking;2021-06-13

3. Effect of material thickness and reduction ratio on roughness transfer in skin-pass rolling to DC04 grade sheet materials;Industrial Lubrication and Tribology;2021-05-19

4. Experimental and numerical analysis of the Lüders phenomenon in simple shear;International Journal of Solids and Structures;2017-02

5. Development and application of roll contour configuration in temper rolling mill for hot rolled thin gauge steel strip;Ironmaking & Steelmaking;2012-04