Author:
Krüger Robert,Wagenführ André
Abstract
Abstract
In this study, the relatively new picture frame method applied to wood is compared with three established shear test methods, namely the experimental modal analysis, the square plate twist method and the torsion test. For the investigations, the wood species European beech (Fagus sylvatica L.) and spruce (Picea abies L. Karst.) were used and the shear tests were conducted in LR and RL direction. The results show comparable shear moduli for beech and spruce in the range of 931–1289 Nmm−2 and 495–842 Nmm−2, respectively. In contrast to the theory of linear elastic orthotropic materials, significant differences in the results of the picture frame method between LR and RL direction were observed for spruce.
Publisher
Springer Science and Business Media LLC
Subject
General Materials Science,Forestry
Reference32 articles.
1. Bachtiar EV, Rüggeberg M, Hering S, Kaliske M, Niemz P (2017) Estimating shear properties of walnut wood: a combined experimental and theoretical approach. Mater Struct 50:248.
https://doi.org/10.1617/s11527-017-1119-2
2. Bodig J, Jayne BA (1982) Mechanics of wood and wood composites, 712nd edn. Van Nostrand Reinhold, New York
3. Brabec M, Lagaňa R, Milch J, Tippner J, Sebera V (2017) Utilization of digital image correlation in determining of both longitudinal shear moduli of wood at single torsion test. Wood Sci Technol 51:29–45.
https://doi.org/10.1007/s00226-016-0848-7
4. Brandner R, Freytag B, Schickhofer G (2008) Determination of shear modulus by means of standardized four-point bending tests. CIB-W18:1–13
5. Bucur V, Archer RR (1984) Elastic constants for wood by an ultrasonic method. Wood Sci Technol 18(4):255–265.
https://doi.org/10.1007/BF00353361
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献