Author:
Li Jing,Li Xiao-Rong,Zhan Hong-Bin,Song Ming-Shui,Liu Chen,Kong Xiang-Chao,Sun Lu-Ning
Abstract
AbstractFracability is a property that indicates how easy reservoir rocks can be fractured in hydraulic fracturing operations. It is a key parameter for fracturing design and evaluation. In order to utilize continuous logging data to predict fracability, synchronous tests of dynamic and static mechanical parameters of rocks under different confining pressures were conducted on 13 tight sandstone samples derived from the central Junggar Basin, China. A modified formula between dynamic and static mechanical parameters was established. Fracability of the tight reservoir in the Junggar Basin was then evaluated based on brittleness index, fracture toughness, and fracability index. The effectiveness of fracturing was analyzed combined with the oil testing curve after hydraulic fracturing. The results show that: (1) The distribution of oil-bearing formations in the studied area coincides well with stratum of higher fracability index. (2) The critical fracability index is determined to be 0.3, three formations are selected as fracturing candidates, and a thin mudstone interbed is identified in the oil-bearing formation. (3) Well testing curve verifies the reliability of the fracability evaluation method and the accuracy of the modified formula between dynamic and static mechanical parameters. This study provides useful information for improving fracturing operations of tight oil and gas reservoirs.
Subject
Economic Geology,Geochemistry and Petrology,Geology,Geophysics,Energy Engineering and Power Technology,Geotechnical Engineering and Engineering Geology,Fuel Technology
Reference15 articles.
1. Chen JG, Deng J, Yuan JL, et al. Determination of fracture toughness of Mode I and Mode II of shale formation. Chin J Rock Mech Eng. 2015;34(6):1101–5. https://doi.org/10.13722/j.cnki.jrme.2014.1187(in Chinese with English abstract).
2. Chen ZX, Chen M, Yan J. Experimental study on the relationship between rock fracture toughness and acoustic velocity. Oil Drill Prod Technol. 1997;19(5):56–60. https://doi.org/10.13639/j.odpt.1997.05.017(in Chinese with English abstract).
3. Govindarajan S, Gokaraju DV, Mitra A, et al. Evaluation of fracability index for reservoir rock—a laboratory study. In: 51st US rock mechanics/geomechanics symposium. American Rock Mechanics Association; 2017. https://www.onepetro.org/conference-paper/ARMA-2017-0381.
4. Irwin GR. Analysis of stresses and strains near the end of a crack traversing a plate. J Appl Mech. 1956;24:361–4.
5. Jin X, Shah SN, Roegiers JC, et al. Fracability evaluation in shale reservoirs—an integrated petrophysics and geomechanics approach. SPE J. 2014;20:518–26. https://doi.org/10.2118/168589-MS.
Cited by
17 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献