Rope–sheave contact transient analysis in hoisting operations with a bristle model and an arbitrary Lagrangian–Eulerian approach

Abstract

AbstractThis paper describes the development of a computational model for the rope–sheave contact interaction in reeving systems when the ropes are modeled with an arbitrary Lagrangian–Eulerian approach. This discretization approach has been developed in previous publications as a general and systematic method for the modeling and simulation of reeving systems. However, the rope–sheave contact model was avoided assuming the no-slip contact condition. The contact model developed in this paper introduces specialized ALE-ANCF-cubic rope contact elements that are used to discretize the rope segment winded at the sheave. The contact is modeled using a set of virtual discrete bristles attached to material points in the mid-line of the rope in one end and in contact with the sheave in the other end. Therefore, a second Lagrangian mesh, apart of the ALE mesh used to discretize the rope, is used to define the fixed ends of the bristles. The kinematics and dynamics used to calculate the normal and tangential contact forces are described in detail. The contact model is 3D and can be used to analyze the contact with a sheave groove with arbitrary shape. The tangential contact force model can be used to describe stick and slip contact conditions and, to improve the simulation performance of the model, an LuGre regularization tangential contact force model is used. The rope-sheave contact model is used to analyze the behavior of a simple elevator system. The numerical results show that the static rope-sheave contact interaction agrees well with an analytical solution of the problem. Finally, the same elevator system is analyzed dynamically for a cabin ride of 8 meters with a steady velocity of 1 m/s. Results show that the normal and tangential contact forces during the steady velocity period are not so different from the static solution, but very different from the classical Creep Theory and Firbank’s Theory.