Moderate active Fe3+ doping enables improved cationic and anionic redox reactions for wide-voltage-range sodium storage

Abstract

AbstractLayered metal oxides are promising cathode materials for sodium-ion batteries (SIBs) due to their high theoretical specific capacity and wide Na+ diffusion channels. However, the irreversible phase transitions and cationic/anionic redoxes cause fast capacity decay. Herein, P2-type Na0.67Mg0.1Mn0.8Fe0.1O2 (NMMF-1) cathode material with moderate active Fe3+ doping has been designed for sodium storage. Uneven Mn3+/Mn4+distribution is observed in NMMF-1 and the introduction of Fe3+ is beneficial for reducing the Mn3+ contents both at the surface and in the bulk to alleviate the Jahn–Teller effect. The moderate Fe3+/Fe4+ redox can realize the best tradeoff between capacity and cyclability. Therefore, the NMMF-1 demonstrates a high capacity (174.7 mAh g−1 at 20 mA g−1) and improved cyclability (78.5% over 100 cycles) in a wide-voltage range of 1.5–4.5 V (vs. Na+/Na). In-situ X-ray diffraction reveals a complete solid-solution reaction with a small volume change of 1.7% during charge/discharge processes and the charge compensation is disclosed in detail. This study will provide new insights into designing high-capacity and stable layered oxide cathode materials for SIBs.