Application of DIC to deformation measurement around damages in CFRP cross-ply laminates-Reference-Cited by-同舟云学术

Application of DIC to deformation measurement around damages in CFRP cross-ply laminates

Published:2019 Issue:3 Volume:6 Page:19-00003-19-00003
ISSN:2187-9745
Container-title:Mechanical Engineering Journal
language:en
Short-container-title:

Author:

FIKRY M.J. Mohammad¹,OGIHARA Shinji¹,Vinogradov Vladimir²

Affiliation:

1. Department of Mechanical Engineering, Tokyo University of Science

2. School of Engineering, Newcastle University

Publisher

Japan Society of Mechanical Engineers

Subject

General Medicine

Link

https://www.jstage.jst.go.jp/article/mej/6/3/6_19-00003/_pdf

Reference24 articles.

1. Arikawa S., Endo Y., Evaluation of Stiffness Degradation on CFRP Laminate by Measuring Strain Distribution Using Speckle Interferometry, Journal of the Japanese Society for Experimental Mechanics, Vol. 17, No 1 (2017), pp.15-20.

2. Boniface L., Smith P., Bader M., Rezaifard A., Transverse ply cracking in cross-ply CFRP laminates - Initiation or propagation controlled?, Journal of Composite Materials, Vol. 31, (1997), pp.1080-1112.

3. Fikry M., Ogihara S., Vinogradov V., The effect of matrix cracking on mechanical properties in FRP laminates, Mechanics of Advanced Materials and Modern Processes, Vol. 4, (2018) No 3.

4. GOM ARAMIS Homepage, https://www.gom.com/3d-software/gom-correlate.html, Accessed date: 2019.01.20.

5. Groves S., Harris C., Highsmith A., Allen D. and Norvell R., An Experimental and Analytical Treatment of Matrix Cracking in Cross-Ply Laminates, Experimental Mechanics, Vol. 27, No 1 (1987), pp.73-79.

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Development of Crack Detection System Using DIC Method and Evaluation of Fatigue Crack Growth in CFRP Laminates;Journal of the Japan Society for Composite Materials;2024-03-15

2. Validating the efficacy of deformation distribution measurement in CFRP laminates during three-point bending using the sampling moiré method;International Conference on Optical and Photonic Engineering (icOPEN 2023);2024-02-15

3. A comparative study on milling-induced damages and residual tensile strength during milling of thermoplastic and thermoset carbon fibre reinforced polymers;Polymer Testing;2023-08

4. IRT and DIC Synchronous Detection of Stress Intensity Factors and Plastic Zone Ranges;Journal of Physics: Conference Series;2023-04-01

5. Numerical and Experimental Studies for Fatigue Damage Accumulation of CFRP Cross-Ply Laminates Based on Entropy Failure Criterion;Materials;2022-12-31